1、不要让货叉承载高于其额定载荷。
2、在不了解各个叉车和货叉承载量的情况下，请勿在叉车之间换用货叉。
3、不要将货叉用于设计范围之外的应用。
4、外加的叉套长度不要超过相应货叉长度的150%。
5、除非获得制造商的许可和程序说明，请不要自行维修或改装货叉，特别是采用焊接的方式。
6、不要使用单支货叉承载整个或部分载荷。
7、不要对货叉施加侧面压力，通常称为“侧面装载”，因为货叉仅被设计用于竖向装载。
1. Do not let the fork load higher than its rated load.
2. Do not change forklifts between forklifts without knowing the load capacity of each forklift and forks.
3. Do not use forks for applications outside the design range.
4. The length of the additional fork sleeve should not exceed 150% of the corresponding fork length.
5. Please do not repair or modify the forks by yourself unless you have obtained the manufacturer's permission and instructions, especially by welding.
6. Do not use a single fork to carry the whole or part of the load.
7. Do not exert side pressure on the forks, which is usually called "side loading" because the forks are only designed for vertical loading.
